Card Type DWDM EDFA
Compensate power of signal light in the transmission link and amplify the optical signals of up to 48CH (100GHz channel interval) or 96CH (50GHz channel interval) at the C band at the same time.
https://www.wdmlight.com/Card-Type-DWDM-EDFA.html
Main function is to compensate the power of the signal light in the
transmission link, and it can amplify the optical signals of up to 48 channels
(channel interval of 100 GHZ) or 96 channels (channel interval of 50 GHz) at the
C band at the same time. It has characters of flat gain, locked gain, low noise
figure, etc. and its an indispensable important component for DWDM systems,
future high-speed systems, and all-optical network long-distance
transmission
Types of EDFA Amplifier
Diagram
Specification
Specification
|
Function |
Note |
|
Working wavelength range |
Standard type: 1529nm~1561nm Applicable to 40 wavelengths (100GHz) or 80 wavelengths (50GHz)DWDM system. |
|
Extension type: 1528nm~1568nm Applicable to 48 wavelengths (100GHz) or 96 wavelengths (50GHz)DWDM system. |
|
|
Min input optical power |
-30 dBm |
|
Max output power |
+22dBm |
|
Max Gain |
30dB |
|
Noise factor |
＜5.5dB |
|
Gain flatness |
＜1.5dB |
|
Secondary amplification |
Support a built-in dual pump (optional) for signal secondary amplification. |
|
Unique technology |
Support gain locking technology, transient control technology automatic shut-off technology of output optical power. |
|
EVOA function |
Built-in EVOA(optional); network management can adjust dynamic damping range of 1dB~20dB |
|
Network management function |
· Support real-time monitoring for EDFA port working state, including optical power, optical pumping, temperature, etc. · · Support pump shutdown threshold and automatic recovery time setting function. · |
|
Occupied slot number |
Support OTN series chassis, occupy 1 slot |
|
Optical interface |
LC/UPC |
|
Max power consumption |
15W |
|
MTBF |
＞100000 hours |
Related products
-
-
200G OTN Muxponder
Contact UsThe 2*200G CFP2 muxponder is a 4*100G service access module designed and developed for optical fiber links.
-
4x400G DCI MUXPONDER Platform, 16*100G 1.6T Transmission 1U Rack
Contact Us4x400G DCI BOX, 16*100G 1.6T Transmission 1U Rack.4x100G QSFP28 To 400G CFP2，Maximum of 4x400G, 1.6Tbps in 1U Rack, and support 48*400G DWDM@100GHz or 64*400G DWDM@75GHz on dual fiber transmission.
-
2.5G Transponder
Contact UsIts main function is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 42Mbit/s~2.67Gbit/s to be accessed
Reviews
There are no reviews yet.