Medium Duty Rack
Sectional structure without any bolt;Nice appearance with simple structure;Easy to install & disassemble;Pitch in 50mm to be and finish baking to pre-rust.
Medium Duty Rack- type A
Sectional structure without any bolt;Nice appearance with simple
structure;Easy to install & disassemble;Pitch in 50mm to be and finish baking to pre-rust;It is suitable for super market and storehouse
etc.
| S/N | Size(LengthxDepth) | Capacity per layer | Height | Surface treatment | Size of upright |
| 1 | 1200x470mm | 300kgs | H=1.5,1.8,2.1,2.4m | Plastic spaying | 55x40x1.8mm,Pitch=50mm, |
| 2 | 1200x600mm | 300kgs | |||
| 3 | 1200x720mm | 300kgs | |||
| 4 | 1500x470mm | 250kgs | |||
| 5 | 1500x600mm | 250kgs | |||
| 6 | 1500x720mm | 250kgs | |||
| 7 | 1800x470mm | 200kgs | |||
| 8 | 1800x600mm | 200kgs | |||
| 9 | 1800x720mm | 200kgs |
Medium Duty Rack-type B
Luxurious and elegant;Optimizes warehouse space;The layer can be steel plate,wood board or galvanized panel;The height can be adjusted easily by 50mm per a pitch;Easy to assemble without any screw thread connectors
| S/N | L X D X H | Capacity per layer | Layer number | Surface treatment | Size of upright |
| 1 | 1200 x 500 x 1800mm | 300-500kgs | 4 | Powder coated | 55x47x2.0mm,Pitch=50mm |
| 2 | 1200 x 600 x 2000mm | 300-500kgs | 5 | ||
| 3 | 1200 x 700 x 2400mm | 300-500kgs | 6 | ||
| 4 | 1500 x 500 x 2000mm | 300-500kgs | 5 | ||
| 5 | 1500 x 600 x 2200mm | 300-500kgs | 6 | ||
| 6 | 1500 x 700 x 2500mm | 300-500kgs | 7 |
Related products
-
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.
-
FS-V-F240 Injection valve
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
VMC 700 CNC Vertical Milling Center
Contact UsThe three axes are designed with direct drive,high inertia motor with large lead screw, three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.Standard 21 servo tool changer.
-
Reviews
There are no reviews yet.