YG815D-I Thermal and Wet Resistance Tester
It is used to measure the combustion performance of various textile fabrics in the horizontal direction and expressed by the flame spread rate.
It is used to measure the combustion performance of various textile fabrics in the horizontal direction and expressed by the flame spread rate.
FZ/T01028, ASTM D5132, JIS D1201, etc.
1. Combustion timing: any preset within 0.1s ~ 999.9s, the standard combustion time is 15s;
2. Ignition diameter: φ9.5mm;
3. The timing range of burning time is 0.01s～655.35s
4. Flame height: adjustable from 15mm to 65mm, the standard flame height is 38±2mm;
5. Gas source: industrial propane or butane gas, standard safety cylinder;
6. Air pressure after decompression: adjustable from 1KPa to 18KPa;
7. Dimensions: 390×230×590mm;
8. Weight: 24kg;
9. Power supply: AC220V/50Hz.
1. Microcomputer control, wide-screen LCD display.
Related products
-
FS-V-F240 Injection valve
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.
-
Used NSC Schlumberger GC14 Gilling Machine
Contact UsYear: 1996
Spinning production line
Mixed strip: GC15 barrel diameter 1000 * 1200mm, 1 head and 1 barrel, automatic barrel change
One stitch: GC14 cylinder diameter 1000 * 1200mm, 1 head and 1 barrel, with self leveling and automatic barrel changing
Two needles: GC14 cylinder diameter 700 * 1200mm, two heads and two barrels, automatic barrel changing
Three needles: GC14 cylinder diameter 600 * 1200mm, 4 heads, 2 barrels, automatic barrel change
According to your requirements, we can transform it into a suitable size for your production needs!
Reviews
There are no reviews yet.