Injection Cylinder (Welding Type)
Used for machine to make the activity like push/hit/pull etc.
The injection cylinder can provide the force to inject the plastic. The
cylinder diameter and rod diameter of the oil cylinder are not much different,
and the piston rod is welded into a whole with a hollow tube and a piston head.
The back cover and the cylinder barrel are also welded as a whole.
| Cylinder name | Bore range | Travel range | Rated pressure (Mpa) | Installation method |
| Injection cylinder (welding type) | 85～165 | 110～300 | twenty one | Flange |
1. Tie rod type, the front and rear covers are fixed by a tie rod. Limited by
the tie rod, it is generally suitable for small oil cylinders. Although the wall
thickness is the thinnest, under the same specification, the external dimensions
will be too large, and the space waste is serious.
2. Bolt type, the front and rear covers and the cylinder barrel are connected
by bolt groups. The required thickness of the cylinder is the largest, and the
raw materials are relatively wasteful. Generally suitable for large
cylinders.
3. Threaded type, the front and rear covers and the cylinder barrel have
large threads, and are connected by threads. The required thickness is smaller
than the bolt type, but it is still thicker, and a large nut is required to
ensure the assembly direction. Generally suitable for large long cylinders
4. Welding type, the back cover and the cylinder are welded into a whole, the
wall thickness of the cylinder is relatively thin, and the whole is relatively
compact. The material cost is not high, but the processing is the most difficult
and the processing cost is the highest.
Related products
-
Deep Groove Ball Bearings
Contact UsDeep groove bearings are a widely used bearing type known for their simple design and excellent performance.
-
ATLAS COPCO 3002600380 AIR/OIL FILTER KIT
Contact UsWe are ATLAS COPCO 3002600380 AIR/OIL FILTER KIT supplier and provide replacement parts for major air compressor manufacturers. Please feel free to contact us at henry.guan@foxmail.com with any questi
-
Oblique Cut Lamination
Contact UsShearing is a common cutting method for silicon steel sheets. Silicon steel is sheared with a carbide blade, which can cut the required size and shape. Shear method on the thermal impact of silicon steel core is small, the kerf is smoother, but the shear force is more damage, easy to produce deformation and burr. Therefore, the shear method is suitable for cutting smaller lamination, the requirement of surface flatness is not too high occasions.
Our company has introduced advanced oblique cut equipment, which is able to cut large silicon steel core to meet more needs of customers. -
DIN-EN 856 4SH
Contact UsSTANDARD: EN856 4SH MT98 4SH
COVER: oil resistant neoprene
REINFORCEMENT: four spiral high strength copper-coated steel wire
COVER; friction & weather resistant special rubber
TEMPERATURE RANGE: -40℃ /+100℃ ; -40 °F/+212°F LT-55 & HT150℃ customizable
APPLICATION: suitable for oil and water based fluid hydraulic system, construction machinery, agricultural machinery, oil drilling, mining machinery, iron and steel, chemical industry, energy, rail transit, food processing machinery and shipbuilding
Reviews
There are no reviews yet.