Full Shift Cylinder (Welding Type)
Widely used for moving whole part of machines with low speed.
The overall oil cylinder plays the role of moving the injection molding
mechanism, and the whole is slender. The back cover and the cylinder barrel are
welded into a whole. Small size oil cylinder, piston rod and piston are welded
as a whole, with high assembly precision, and the front cover is soldered with
bronze guide, which has good wear resistance.
| Cylinder name | Bore range | travel range | Rated pressure (Mpa) | Installation method |
| Full shift cylinder (welding type) | 50～135 | 200～2100 | 17.5, 21 | Earrings |
1. Tie rod type, the front and rear covers are fixed by a tie rod. Limited by
the tie rod, it is generally suitable for small oil cylinders. Although the wall
thickness is the thinnest, under the same specification, the external dimensions
will be too large, and the space waste is serious.
2. Bolt type, the front and rear covers and the cylinder barrel are connected
by bolt groups. The required thickness of the cylinder is the largest, and the
raw materials are relatively wasteful. Generally suitable for large
cylinders.
3. Threaded type, the front and rear covers and the cylinder barrel have
large threads, and are connected by threads. The required thickness is smaller
than the bolt type, but it is still thicker, and a large nut is required to
ensure the assembly direction. Generally suitable for large long cylinders
4. Welding type, the back cover and the cylinder are welded into a whole, the
wall thickness of the cylinder is relatively thin, and the whole is relatively
compact. The material cost is not high, but the processing is the most difficult
and the processing cost is the highest.
Related products
-
ATLAS COPCO 3001500626 MPV KIT
Contact UsWe are ATLAS COPCO 3001500626 MPV KIT supplier and provide replacement parts for major air compressor manufacturers.
-
Duplex S32205 Seamless Pipe ASTM A790 Annealed Pickled
Contact UsSpecification: ASTM A790/A790M
Name: Duplex SS S32205 Seamless Pipe
Grade:S32205
Process: Seamless
Delivery Condiction:
1. Annealed, Pickled
2. Bright Annealed -
ATLAS COPCO OIS I-04 C80 VSD+ 1616772590
Contact UsWe are ATLAS COPCO OIS I-04 C80 VSD+ 1616772590 supplier and provide replacement parts for major air compressor manufacturers.
-
DIN-EN 856 4SH
Contact UsSTANDARD: EN856 4SH MT98 4SH
COVER: oil resistant neoprene
REINFORCEMENT: four spiral high strength copper-coated steel wire
COVER; friction & weather resistant special rubber
TEMPERATURE RANGE: -40℃ /+100℃ ; -40 °F/+212°F LT-55 & HT150℃ customizable
APPLICATION: suitable for oil and water based fluid hydraulic system, construction machinery, agricultural machinery, oil drilling, mining machinery, iron and steel, chemical industry, energy, rail transit, food processing machinery and shipbuilding
Reviews
There are no reviews yet.