Rotary Kiln Incinerator
The hazardous waste rotary kiln incineration system is a high-temperature thermal treatment solution designed for the safe and efficient disposal of a wide range of hazardous and solid wastes.
Characteristic:
1. It can simultaneously incinerate solid waste, liquids, colloids, and
gases, and has strong applicability to incineration materials;
2. Burning materials are agitated and advanced, with three heat transfer
methods coexisting in one furnace, resulting in a high heat utilization
rate;
3. The transmission mechanism is simple, the transmission mechanism is
located on the kiln shell, and the equipment maintenance is simple;
4. The residence time of up to 1 hour and high temperature above 850 ℃ in the
rotary kiln basically burn out hazardous waste;
5. The strong gas mixing in the secondary chamber causes incomplete
combustion of the unburned substances in the flue gas, reaching the high
temperature (1100 ℃) required for the decomposition of harmful components. The
residence time of the flue gas in the high temperature zone is greater than 2
seconds. Avoiding the working conditions where dioxins are produced from the
source;
6. Good sealing measures and furnace negative pressure ensure that harmful
gases do not leak out;
7. The equipment has a high operating rate, with an annual operating rate
generally reaching 90%; Easy to operate and maintain。
Scope of application: Centralized disposal of hazardous waste, chemical
sludge, oil sludge, chemical kettle residue, waste liquid, etc
Related products
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
Used NSC Schlumberger GC14 Gilling Machine
Contact UsYear: 1996
Spinning production line
Mixed strip: GC15 barrel diameter 1000 * 1200mm, 1 head and 1 barrel, automatic barrel change
One stitch: GC14 cylinder diameter 1000 * 1200mm, 1 head and 1 barrel, with self leveling and automatic barrel changing
Two needles: GC14 cylinder diameter 700 * 1200mm, two heads and two barrels, automatic barrel changing
Three needles: GC14 cylinder diameter 600 * 1200mm, 4 heads, 2 barrels, automatic barrel change
According to your requirements, we can transform it into a suitable size for your production needs! -
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line.
Reviews
There are no reviews yet.